Marmorino and Venetian plasters have been well-known since the middle ages due to their stunning appearances and finishes. They are sometimes generically known as marble or polished plasters, which depend on the finishes that may be achieved. They can be glossy, smooth, or marble textured to appear like stone.
So if you’re excited about applying Venetian plaster to a particular place in your house, we’ll assist you through the process to accomplish a successful finish.
8 Steps for a Successful Venetian Plaster Application
The antique surface finish of Venetian plaster offers a classy look of natural stone and polished marble. Traditionally, Venetian plaster is applied by knowledgeable craftsmen to accomplish the right effect and finish. Some first-timers would even sign up for a Venetian plaster course to guarantee they properly do the job. You may check this page if you’re interested in the said course.
However, today’s new materials can help DIYers attain similar results with easy methods without the required professional skills. So below are eight steps to apply Venetian plaster finish on your home.
1. Choose the type of Venetian plaster you want
The type of Venetian plaster UK you choose will depend upon your proficiency and budget. Venetian plasters come in three material variants, each with distinguishing characteristics, looks, and price ranges. You can go with acrylic, natural lime-based, or gypsum-based plasters. To know what these look like, you might search the internet to see what would fit your taste.
2. Prepare the walls
It’s best to do a plastering job with smooth walls. Ensure all the holes in the wall are filled and the rough surfaces are sanded, so they do not show in the completed work.
3. Lay down tarps and prepare the tools
Setting tarpaulins is essential to protect the work area’s floorings, as people do when painting. Make sure your Venetian plaster trowels, blades, spatulas, cloths, and sponges are ready to ensure a smooth process and prevent intermittent productivity from looking for the tools required for the job. Should you need Marmorino tools UK for your do-it-yourself project, you may browse the web for credible suppliers to have yours.
4. Prime the wall
After sanding and smoothing the wall, apply primer. This will help bind the plaster you’ll use later, acting like an adhesive or glue. Ensure it’s completely dry before you advance to the next step.
5. Apply the first coat
Use a trowel to apply the plaster’s base coat. Spread the plaster in the thinnest possible way while using small or random strokes and patterns. Avoid spreading it in the same direction. Hold the trowel at an angle of 15 to 30 degrees and frequently wipe it with a dry cloth to keep the plaster dust from affecting your pattern.
6. Apply the second coat
The second coat is meant to level the ridges from the first coat and is typically lighter. Put plaster on the trowel and smooth out the previous strokes on the wall. Leave some areas uncovered, so the first coat shows through small patches. If you’re not satisfied with the result of the second coat, you can apply a third coat if you want.
7. Burnish the finish
Using a clean trowel before the second coat completely dries, burnish the wall and slide it across the plaster. Hold the trowel at a 30-degree angle and use moderate pressure to give it a shiny look. Burnishing it more can make your plaster look shinier. Wait for 48 hours before proceeding to the next step.
8. Wax the plaster
Applying a topcoat of protective wax to the plaster can brighten your wall, soften it, and shield it from moisture. Apply the material to the wall using a sponge in circular motions. You can apply two to three thin coats to finish up.
